|
|
|
|
|
|
|
|
|
|
|
|
| Gift Certificates! |
 |
|
|
 |
|
 |
Home >
Forced Induction >
Superchargers >
| VF Engineering Stage 1 Supercharger Kit for E46 323 |
| Product Code: VF K22-01 |
Other products from VF Engineering |
|
|
|
 |
| Pricing: |
| Your Price: |
$5,000.00 |
| FREE SHIPPING! |
|
More Pictures
|
No special tools or modifications required. 8-10 Hours fitting time, fully reversible.
VF-Engineering chose to supercharge the BMW to improve throttle response and mid-to-top end power with the centrifugal Vortech supercharger. Maintaining the the original BMW quality, smoothness and reliability were the key factors in the VF design. This is where the GIAC software comes into full play. VF have harnessed reliability of Vortech superchargers and quality of GIAC custom software with their 10 years of supercharging experience and worldwide OEM supply contacts to create the ultimate supercharger system for the ultimate drivers car.
VF engineers spent over 12 months software testing the BMW Bosch and Siemens ECUs and resolved “stalling and MAF issues ” faced by other supercharger systems. Software flash technology and latest BMW file versions have all been employed to provide the cleanest and most reliable method of software installation. GIAC engineers extensively re-wrote the ECU software using their own binary, assembly and disassembly algorithms written from scratch. Testing the software included extensive road and dyno test cycles, with acceleration and deceleration tests for driveability smoothness and ECU fuel management. All test cars were put through long term full throttle testing in conditions varying from wet cold climates to hot dry Arizona desert temperature for safe-optimal air fuel ratios and knock activity monitoring. Competantly written ECU software has allowed VF to fully explore the potential of the BMW engine making over 40% more power in most applications.
VF chose to mount the Vortech supercharger with an in-house CNC machined aluminum bracket system. The unit is positioned in line with the original serpentine belt which is replaced with a longer OEM belt. The key to this design is that the OEM active-spring belt tensioner remains fully functional and eliminates belt slip or the need to manually tension the belt. The supercharger air ducts are custom molded in-house from plastic to give an OEM appearance, quality and fit. The incorporated Bosch boost overrun system is designed for smooth off-throttle cruising and deceleration with clean emmissions. The crankcase ventillation sytem is designed to cope with positive pressure and high flow OEM injectors are supplied to fit as direct replacements without modification to the injector rail. A removeable plastic air box is provided with the K&N induction filter for those who use their vechicles in persistently wet climates.The VF supercharger system remains fully OBD2 compliant and is supported by a 3 year unlimited mileage warranty on the product only. Installation can be performed in approximately 8 hours and is non-intrusive allowing it to be fully reversible.
Every aspect of this kit has been fully engineered for high quality fitment and highly demanding performance and expectation. VF's in-house horizontal, turning and milling CNC's and plastic molding plant, GIAC's industry reputation and track record and Vortech's reliability have been fully exploited to create a product with internationally un-rivalled material technology, quality and performance.
Not all vehicles respond identically to engine modifications which is why it is important to consider the "delta" or relative power increase measured on the same dyno before and after modification. Power gains shown by VF have been found to be accurate on test vehicles on 91 octane at sea level, with stock setups (ie throttle body, exhaust system etc). The GIAC software adapts just as the OEM software and a slight increase in performance may be expected from the use of higher quality fuels such as 93 octane. Power gains may vary according to factors such as altitude or vehicle condition. Automatic vehicles are compatible but due to the nature of the transmission, dyno measurements are not made.
Stage 1 is setup to create 6psi manifold pressure at peak boost. VF engineers tested and found 6psi to be the optimal induction charge limit without aftercooling.
Kit Specs
• GIAC custom tuned stage 1 software
• RPM limiter increased to 7000 rpm
• Soft rev limiters and top speed governor removed
• Vortech V2 Super Quite SC trim polished supercharger
• 3 year unlimited mileage limited product warranty
• VF- CNC machined 6061 aluminum bracket system
• OEM BMW idler pullies
• OEM High flow fuel injectors
• VF- Custom molded polypropylene ducting
• VF- Custom tuned supercharger intake
• Bosch overrun bypass valve system
• Custom crank case ventilation system
• 4 ply silicon couplers with OEM screw clamps
• VF- CNC oil fittings with high pressure OEM oil lines
• Replacement OEM serpentine belt
• K&N induction filter with cold air intake and optional air box
• Comprehensive installation CD Rom
• Compatible with automatic transmission (pls specify)
• Precision Made in California, USA
PLEASE NOTE: If you would like to replace the kit's Bosch bypass valve with an Aluminum VF race bypass valve this may be done for $150. See the related part below to upgrade.
|
|
Applications:
|
|
BMW 323 (E36) |
1999 - 2000 |
|
No reviews yet!
Do you own this item? Be the first to review it!
|
|
This product manufactured in: USA
|
|
|
| Related Item:
VF Engineering Race Bypass Valve |
|
Many items ship directly from the manufacturer.
Click here for more information.
|
|
|
|
|
|
|
|
Newest Product
 |
|
|
|
|
|
|
|
| Payments Accepted |
|
|
|
| International Orders |
We now ship internationally!
CONTACT US to order if you are outside of the USA.
|
|
|
| Latest Review
|
|
|
|
|
|
|
|
|
|
