|
|
|
|
|
|
|
|
|
|
|
|
| Payments Accepted |
|
|
|
| International Orders |
We now ship internationally!
CONTACT US to order if you are outside of the USA.
|
|
|
|
|
|
 |
|
| VF Engineering MKIII Front Engine Mount |
| Product Code: VF A04-01 |
Other products from VF Engineering |
|
The VW factory rear engine mount was designed as a soft mount flexible mount, to provide a very comfortable drive. It's drawback was the large amount of engine movement allowed under torque load and on hard acceleration. This engine "slop" greatly decreases stability and smoothness under high performance driving conditions and rapid gear selection. The VW factory mount is constructed from 1 thin (rubber) bush and 1 thicker (rubber) bush. The thick bush is designed to compress on deceleration. The thin bush is designed to compress on acceleration. VF-Engineers chose to redesign this mount by swapping the purpose of the bushes and to use polyurethane instead of rubber. The new design is setup for the thicker bush to absorb load on acceleration - the point under which the mount is subject to maximum stress, making it more effective. VF-Engineering designed, tooled up and manufactured a complete new replacement containing a molded, high durometer polyurethane insert. The mount is constructed from billet aluminum and supplied with the highest tensile hardware available. Fitting should take no more than 20 minutes and fits all MK3 Golf, Jetta, Passat, Vento VR6 and 8V GTIs and Corrado VR6. This high performance mount has been tested on a 3.2 VR6 and supercharged MK3 VR6 with an all Quaiffe gearset running 270hp and provides a dramatic difference in the stability of the car when accelerating and braking hard. Gear changing under hard acceleration is also greatly enhanced. You will notice the difference.
PLEASE NOTE: FITS: MKIII 8V and VR6 including Corrado VR6
|
|
Applications:
|
|
Volkswagen Corrado |
1992 - 1995 |
|
Volkswagen Golf/GTI III |
1993 - 1999 |
|
Volkswagen Jetta III |
1993 - 1999 |
|
No reviews yet!
Do you own this item? Be the first to review it!
|
|
This product manufactured in: USA
|
|
|
Many items ship directly from the manufacturer.
Click here for more information.
|
|
|
|
|
|
|
|
Newest Product
 |
|
|
|
|
|
|
|
| Latest Review
|
|
|
|
|
| Top Sellers |
|
MDS LUX H8 Rings for E92/E93 BMW 3 Series, E90/E92/E93 BMW M3, E90 BMW 3 Series (LCI) and E70 X5 |
|
Thule 91725 Universal Flat Top 6 |
|
Neuspeed Red P-Flo Air Intake w/Heat Shield for VW GTI, Jetta, Eos, Passat, Audi TT, A3 2.0T FSI |
|
BSH Stage 1 PCV Kit for Audi and Volkswagen 2.0T FSI |
|
New South Performance MK5 TurboPod Package (Inc. Indigo Gauge, Pod, Wiring, & Hardware) - Indigo |
|
KMD Tuning FSI Fuel Pump Kit w/ Armoloy Coating for Volkswagen and Audi 2.0T FSI Vehicles |
|
Rieger BMW E36 M3 GT-Look Spoiler Lip |
|
Forge Motorsport Hybrid Blow Off Valve / Diverter Valve for 1.8T Volkswagen/Audi Vehicles |
|
|
|
|
|
Shipping available to APO/AFO addresses
Click here for international shipping quote
Rush shipping available - call for details
