Unleash the power hiding in your factory Engine Control Unit (ECU.) NEUSPEED engineers reprogram your ECU chip to increase turbo boost to approx. 1.0 bar (14.7 psi), optimize ignition timing under part throttle and full throttle load, and raise the rev-limiter and top speed governor. Horsepower is increased by approximately 30-35hp at the wheels. CARB approved (D236-10) when used with a K&N air filter. 91 octane or higher fuel must be used with this chip.
You must use a 5 bar fuel pressure regulator with this chip, and it is also strongly recommended that you use Denso IK22 spark plugs. Click on the Related Part link below to view this FPR.
PLEASE NOTE: Upon placing your order we will email you instructions on how to locate your ECU and how to ship it to Neuspeed for the installation. You will be required to pay the shipping to and from Neuspeed. Once Neuspeed receives your ECU the total turnaround time is roughly 2-3 days. If you need assistance locating your ECU and ECU Number, please click here for instructions on Locating Your ECU
