By using a mechanical valve provided by world reknown Forge Motorsport the BSH Bulletproof DV Kit allows you to quit worrying about your factory rubber diaphragm valve failing, and sets you up for the performance driver you desire! By relocating the valve to the front of the motor closest to the throttle body, the BSH Bulletproof DV kit is able to get air in and out of the motor as quickly and efficiently as possible. No longer is air forced to stop at the throttle body and turn around only to go all the way back to the turbo before being vented.  No longer is air forced to travel the entire length of the intercooler plumbing before entering the motor while in vacuum, with the Bulletproof DV kit, you get performance now!

By minimizing the length of vacuum line between the pressure/vacuum source and the DV the Bulletproof DV kit responds faster then any valve on the market. This is great for your turbo's health as the larger volume of air your modified car is flowing can be vented without the chance of stalling your hard working turbocharger.

Maintenance:

When you do your yearly valve inspection you will never again have to get under the car once you have the Bulletproof DV kit. The valve is now located in plain site and can be accessed in seconds.

Kit Includes:

MAF Housing w/ Port Required for DV relocation
Forge DV
Stock DV Block-off Plug
Foam block off for firewall
All necessary silicone couplers and clamps

Note:

This kit is designed to be used with the BSH Tru Seal Intake.  If you do not have the BSH Tru seal intake, please see the related part below.